Passenger car (Bmw) · 1series, 2series (Active Tourer), 2series (Gran Coupé)
The front end may not be correctly bolted to the engine subframe. If one of the bolts has not been properly tightened and becomes detached, vehicle safety may be compromised in the event of a frontal collision. In this…
Read the official notice →
- Date
- 2025-05-23
- Country
- Germany
- Brand
- BMW
- Product
- Passenger car
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More BMW recalls
- 2025-07-23
USBMW of North America, LLC: Loss of Drive Power
A loss of drive power increases the risk of a crash.
- 2025-07-16
- US
BMW of North America, LLC: High Voltage Battery Failure
Battery module failure may lead to a shutdown of the high-voltage system which can result in a loss of drive power, increasing the risk of a crash. In addition, module failure increases the risk of a fire.
- 2025-07-11
DE
EUPassenger car (Bmw) · iX1, X1
The material used for the B-pillar reinforcement plates is inadequate. This can alter the crash characteristics, leading to an increased risk of injuries in the event of an accident. The product does not comply with…
- 2025-05-23
- DEEU
Passenger car (Bmw) · X3
Damaged brake discs may have been fitted to the front axle. This can lead the brakes to fail when a heavy load is placed on the wheel concerned, increasing the risk of accident and injuries. The product does not comply…
- 2025-05-09
- DEEU
Passenger car (Bmw) · X3
Failure to bolt the plus voltage (B+) cable tightly enough to the starter generator may result in contact problems and an increase in contact resistance at the bolted connection. This may in turn lead to local…
- DEEU
Passenger car (Bmw) · 3er, 4er, i4, 5er, i5, X3, G18 (X5), G68 (5er)
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or…
Other vehicles recalls in Germany
- 2025-05-30
- DEEU
Vehicle part / Shock absorber (Scooter Center GmbH) · BGM77
An insufficient quantity of adhesive and incorrect torque can cause the lower shock absorber mount to come loose. This increases the risk of injury. The product does not comply with the Regulation on the approval and…
- DEEU
Passenger car (Kia) · EV9
The mounting bolts for the first, second and/or third rows of seats may be missing, leading them to not properly restrain occupants, thereby increasing the risk of injury in the event of an accident. The product does…
- 2025-05-23
- DEEU
Bus (Mercedes-Benz) · TOURISMO
The floor bolting of the seating at the front of the vehicle may not have the correct torque in some cases, which is needed to anchor the seating securely to the floor. This leads to an increased risk of injury. The…
- DEEU
Vehicle part / Control arm (ZF Friedrichshafen AG) · LEMFÖRDER: 38526 01; TRW: JTC1619
Due to a production error, the connector inner sleeve of the recalled control arms, when fitted, may leave a gap which could permit further compression of the component during tightening. This can lead to stress in the…
- DEEU
Passenger car (Mini) · COUNTRYMAN
The front end may not be correctly bolted to the engine subframe. If one of the bolts has not been properly tightened and becomes detached, vehicle safety may be compromised in the event of a frontal collision. In this…
- DEEU
Motorcycle (BMW Motorrad) · M1000R, M1000XR
A production fault may cause the jet needle to move out of the screw connection inside the steering damper. This may cause the steering to become heavy. This increases the risk of accidents and injuries. The product…