Passenger car (Bmw) · X3
Damaged brake discs may have been fitted to the front axle. This can lead the brakes to fail when a heavy load is placed on the wheel concerned, increasing the risk of accident and injuries. The product does not comply…
Read the official notice →- Date
- 2025-05-23
- Country
- Germany
- Brand
- BMW
- Product
- Passenger car
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More BMW recalls
- 2025-07-16
US
BMW of North America, LLC: High Voltage Battery Failure
Battery module failure may lead to a shutdown of the high-voltage system which can result in a loss of drive power, increasing the risk of a crash. In addition, module failure increases the risk of a fire.
- 2025-07-11
DE
EU
Passenger car (Bmw) · iX1, X1
The material used for the B-pillar reinforcement plates is inadequate. This can alter the crash characteristics, leading to an increased risk of injuries in the event of an accident. The product does not comply with…
- 2025-05-23
DE
EU
Passenger car (Bmw) · 1series, 2series (Active Tourer), 2series (Gran Coupé)
The front end may not be correctly bolted to the engine subframe. If one of the bolts has not been properly tightened and becomes detached, vehicle safety may be compromised in the event of a frontal collision. In this…
- 2025-05-09
DE
EU
Passenger car (Bmw) · X3
Failure to bolt the plus voltage (B+) cable tightly enough to the starter generator may result in contact problems and an increase in contact resistance at the bolted connection. This may in turn lead to local…
DE
EU
Passenger car (Bmw) · 3er, 4er, i4, 5er, i5, X3, G18 (X5), G68 (5er)
The positive battery cable of the starter-generator may not have been manufactured correctly. This could result in a loose electrical connection, leading to excessive contact resistance. The vehicle cannot charge or…
- 2025-04-16
US
BMW of North America, LLC: Damaged Front Brake Discs
Damaged front brakes may not function properly, increasing the risk of a crash.
Other vehicles recalls in Germany
- 2025-05-23
DE
EU
Motorcycle (BMW Motorrad) · M1000R, M1000XR
A production fault may cause the jet needle to move out of the screw connection inside the steering damper. This may cause the steering to become heavy. This increases the risk of accidents and injuries. The product…
DE
EU
Passenger car (Ford) · Mustang
The incorrect calibration of the power steering control module (PSCM) could lead the steering wheel to oscillate without warning (alternating clockwise/counterclockwise) during steering due to the electric…
DE
EU
Passenger car (Tesla) · Model Y
The car is missing welds on the seat-back frame, which may reduce the structural integrity of the seat, increasing the risk of injury to occupants. The product does not comply with the Regulation on the approval and…
DE
EU
Passenger car (Audi) · A5 Avant
Due to an improperly welded joint, the rear seat back may not meet crash safety requirements. In a frontal collision, there is an increased risk of injury to rear-seat passengers if a heavy load is being transported in…
DE
EU
Motorcycle (Fantic Motor) · Caballero 700
The clutch may malfunction because of the properties of the antirust oil used by the supplier of clutch discs, which may lead to excessive adhesion between the steel discs and the friction discs in the clutch. When the…
DE
EU
Passenger car (Kia) · Niro
The contact area of the female-female (F-F) plug connector, of the high-voltage battery safety plug can develop over time high electrical resistance and consequently overheat and melt. This may lead to a loss of…