Vehicle part / Shock absorber (Scooter Center GmbH) · BGM77
An insufficient quantity of adhesive and incorrect torque can cause the lower shock absorber mount to come loose. This increases the risk of injury. The product does not comply with the Regulation on the approval and…
Read the official notice →- Date
- 2025-05-30
- Country
- Germany
- Brand
- Scooter Center GmbH
- Product
- Vehicle part / Shock absorber
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
Other vehicles recalls in Germany
- 2025-06-13
DE
EU
Vehicle part / Aluminium rim (itWheels) · EMILY
Incorrect pitch-circle diameter (PCD) results in insufficient contact pressure. This can lead to the wheel screws loosening and the wheel may become detached. This increases the risk of accident and injuries. The…
DE
EU
Motorcycle (Kawasaki) · Ninja 500
The clutch release lever may not be properly welded to the shaft due to a manufacturing error. This can cause the weld to break, making it impossible to disengage the clutch, which can increase the risk of accidents…
DE
EU
All-terrain vehicle (Polaris) · Ranger
A crack may occur on a component of the vehicle charging system, allowing water to come into contact with the high voltage components of the charger cable harness. In this case, a short circuit may occur during the…
- 2025-05-30
DE
EU
Passenger car (Kia) · EV9
The mounting bolts for the first, second and/or third rows of seats may be missing, leading them to not properly restrain occupants, thereby increasing the risk of injury in the event of an accident. The product does…
- 2025-05-23
DE
EU
Bus (Mercedes-Benz) · TOURISMO
The floor bolting of the seating at the front of the vehicle may not have the correct torque in some cases, which is needed to anchor the seating securely to the floor. This leads to an increased risk of injury. The…
DE
EU
Passenger car (Bmw) · 1series, 2series (Active Tourer), 2series (Gran Coupé)
The front end may not be correctly bolted to the engine subframe. If one of the bolts has not been properly tightened and becomes detached, vehicle safety may be compromised in the event of a frontal collision. In this…