Passenger car (Kia) · EV9
The mounting bolts for the first, second and/or third rows of seats may be missing, leading them to not properly restrain occupants, thereby increasing the risk of injury in the event of an accident. The product does…
Read the official notice →
- Date
- 2025-05-30
- Country
- Germany
- Brand
- Kia
- Product
- Passenger car
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More Kia recalls
- 2025-07-11
DE
EUPassenger car (Kia) · Cerato
Due to an internal leak of brake fluid, a short circuit may occur in the electrical circuit for the ABS/ESC (anti-lock braking system / electronic stability control) system. This may lead to an increase in current and…
- 2025-07-04
- DEEU
Passenger car (Kia) · SPORTAGE
The vacuum pump in the engine may be damaged by a mechanical defect on the camshaft due to high acceleration torque when the engine starts. As a result, an increased force may be required to apply the brake pedal,…
- 2025-06-20
USKia America, Inc.: Rearview Camera Image May Not Display/FMVSS 111
A rearview image that does not display reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.
- 2025-05-27
- US
Kia America, Inc.: Parking Lights May Flicker/FMVSS 108
Parking lights that fail to illuminate properly can reduce visibility, increasing the risk of a crash.
- 2025-05-23
- DEEU
Passenger car (Kia) · Niro
The contact area of the female-female (F-F) plug connector, of the high-voltage battery safety plug can develop over time high electrical resistance and consequently overheat and melt. This may lead to a loss of…
- 2025-04-04
- DEEU
Passenger car (Kia) · Cadenza
Due to a slight internal leak of brake fluid, a short circuit may occur in the electrical circuit for the Anti-lock Braking System / Electronic Stability Control (ABS / ESC) system. This can lead to an increase in…
Other vehicles recalls in Germany
- 2025-06-13
- DEEU
Motorcycle (Kawasaki) · Ninja 500
The clutch release lever may not be properly welded to the shaft due to a manufacturing error. This can cause the weld to break, making it impossible to disengage the clutch, which can increase the risk of accidents…
- DEEU
All-terrain vehicle (Polaris) · Ranger
A crack may occur on a component of the vehicle charging system, allowing water to come into contact with the high voltage components of the charger cable harness. In this case, a short circuit may occur during the…
- 2025-05-30
- DEEU
Vehicle part / Shock absorber (Scooter Center GmbH) · BGM77
An insufficient quantity of adhesive and incorrect torque can cause the lower shock absorber mount to come loose. This increases the risk of injury. The product does not comply with the Regulation on the approval and…
- 2025-05-23
- DEEU
Bus (Mercedes-Benz) · TOURISMO
The floor bolting of the seating at the front of the vehicle may not have the correct torque in some cases, which is needed to anchor the seating securely to the floor. This leads to an increased risk of injury. The…
- DEEU
Passenger car (Bmw) · 1series, 2series (Active Tourer), 2series (Gran Coupé)
The front end may not be correctly bolted to the engine subframe. If one of the bolts has not been properly tightened and becomes detached, vehicle safety may be compromised in the event of a frontal collision. In this…
- DEEU
Vehicle part / Control arm (ZF Friedrichshafen AG) · LEMFÖRDER: 38526 01; TRW: JTC1619
Due to a production error, the connector inner sleeve of the recalled control arms, when fitted, may leave a gap which could permit further compression of the component during tightening. This can lead to stress in the…