Altec Industries, Inc.: Jib Winch May be Operated without Outriggers Set
Outriggers that are not set when loads are being lifted by the jib winch may cause the unit to tip, increasing the risk of injury.
Read the official notice →- Date
- 2022-10-21
- Country
- United States
- Brand
- Altec Industries
- Product
- EQUIPMENT
- Units
- 71 affected
- Category
- Vehicles
- Source
- NHTSA
Copied automatically from the US National Highway Traffic Safety Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the US National Highway Traffic Safety Administration has the exact models, batch codes and remedy, and it takes priority.
More Altec Industries recalls
- 2023-05-04
USAltec Industries, Inc.: Auger Extension Assembly Missing Hardware
An auger extension bar that detaches while the digger drive unit is deployed, can increase the risk of injury to nearby personnel.
- 2023-03-30
- US
Altec Industries, Inc.: Missing Weld On Rear Pole Rack
A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
- 2023-01-12
- US
Altec Industries, Inc.: Incorrect Bolt Installed
An incorrect bolt in the derrick rotation bearing may cause the adjacent bolts to be overloaded during operation, which could cause separation of the rotation bearing, and increase the risk of an injury.
- 2022-08-10
- US
Altec Industries, Inc.: Boom Weld May Crack
A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.
- 2022-08-04
- US
Altec Industries, Inc.: Engine Stall from Blown Ignition Circuit Fuse
A blown fuse can cause an engine stall, increasing the risk of a crash.
- 2022-06-30
- US
Altec Industries, Inc.: Inadequate Circuit Protection
An overloaded electrical circuit can increase the risk of a fire.
Other vehicles recalls in the United States
- 2022-10-21
- US
Autocar, LLC: Steering Column Pinch Bolt Improperly Secured
An improperly secured steering column shaft pinch bolt can bind, causing a sudden loss of steering and increasing the risk of a crash.
- US
Daimler Vans USA, LLC: Vehicle Rollaway from Guide Bushing Fatigue
Vehicle rollaway increases the risk of a crash.
- US
Winnebago Industries, Inc.: LP Fuel Line May Contact Tire and Cause a Gas Leak
A gas leak in the presence of an ignition source increases the risk of a fire.
- US
Thule, Inc.: Bike Arm Assembly Weld Defect
A detached bike arm assembly can fall into the roadway, increasing the risk of a crash.
- 2022-10-20
- US
Volvo Car USA, LLC: Loss of Drive Power
The vehicle may lose drive power as the high voltage battery is depleted, increasing the risk of a crash.
- US
Ford Motor Company: Improperly Tightened Bolt on Rear Axle
Wheel separation from the vehicle increases the risk of a crash.