Altec Industries, Inc.: Missing Weld On Rear Pole Rack
A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Read the official notice →- Date
- 2023-03-30
- Country
- United States
- Brand
- Altec Industries
- Product
- STRUCTURE
- Units
- 1,967 affected
- Category
- Vehicles
- Source
- NHTSA
Copied automatically from the US National Highway Traffic Safety Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the US National Highway Traffic Safety Administration has the exact models, batch codes and remedy, and it takes priority.
More Altec Industries recalls
- 2023-05-18
USAltec Industries, Inc.: Strobe Lights May Short and Cause Fire
An electrical short-circuit can increase the risk of a fire.
- 2023-05-11
- US
Altec Industries, Inc.: Boom Pressure Limiter Incorrectly Set
Lifting loads above the boom capacity could overload the unit and cause instability, increasing the risk of injury.
- 2023-05-04
- US
Altec Industries, Inc.: Auger Extension Assembly Missing Hardware
An auger extension bar that detaches while the digger drive unit is deployed, can increase the risk of injury to nearby personnel.
- 2023-01-12
- US
Altec Industries, Inc.: Incorrect Bolt Installed
An incorrect bolt in the derrick rotation bearing may cause the adjacent bolts to be overloaded during operation, which could cause separation of the rotation bearing, and increase the risk of an injury.
- 2022-10-21
- US
Altec Industries, Inc.: Jib Winch May be Operated without Outriggers Set
Outriggers that are not set when loads are being lifted by the jib winch may cause the unit to tip, increasing the risk of injury.
- 2022-08-10
- US
Altec Industries, Inc.: Boom Weld May Crack
A cracked weld may allow the auger bracket to detach from the boom, increasing the risk of injury.
Other vehicles recalls in the United States
- 2023-03-30
- US
International Motors, LLC: ECM Software May Cause Sudden Stop While Driving
A vehicle that unexpectedly slows to idle speed on the roadway can increase the risk of a crash.
- US
Capacity of Texas: Steer Axle Fasteners May Come Loose
Steer axle assembly separation can result in a loss of vehicle control, increasing the risk of a crash.
- US
Jayco, Inc.: Rear Stabilizer Bar Brackets May Break
Brackets that separate from the vehicle can create a road hazard, increasing the risk of a crash.
- US
Polaris Recalls RZR Recreational Off-Road Vehicles Due to Fire Hazard (Recall Alert)
The alternator can fail during operation, posing a fire hazard.
- US
Jetson Electric Bikes Recalls 42-Volt Rogue Self-Balancing Scooters/Hoverboards Due to Fire Hazard; Two Deaths Reported
The lithium-ion battery packs in the self-balancing scooters/hoverboards can overheat, posing a fire hazard.
- 2023-03-29
- US
Kia America, Inc.: High-Voltage Battery Pack May Short-Circuit
A battery electrical short-circuit increases the risk of a fire.