Medtronic MiniMed recalls MiniMed 640G Insulin Pump (O.U.S. Version)
Due to battery cap deterioration, this may potentially result in an incomplete battery circuit (similar to when battery cap is not attached) and a loss of power/functionality of the insulin infusion pumps.
Read the official notice →- Date
- 2022-07-20
- Country
- United States
- Brand
- Medtronic MiniMed
- Product
- MiniMed 640G Insulin Pump (O.U.S. Version)
- Classification
- Class II
- Units
- U.S.: AK, AL, AR, AZ, CA, CO, CT, DC, DE, FL, GA, HI, IA, ID, IL, IN, KS, KY,…
- Category
- Drugs & medical
- Source
- FDA · Device
Copied automatically from the US Food and Drug Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check the product name, strength and lot number against the official notice.
- Do not stop a prescribed medicine without talking to your doctor or pharmacist first.
- Ask the pharmacy or supplier about a replacement or refund.
General guidance from Recall Atlas. The official notice from the US Food and Drug Administration has the exact models, batch codes and remedy, and it takes priority.
More Medtronic MiniMed recalls
- 2025-03-12
USMedtronic MiniMed, Inc. recalls MiniMed insulin pump, REF: 770G (MMT-1880, MMT-1881, MMT-1882, MMT-1890, MMT-1891, MMT-1892)
All Medtronic MiniMed pumps (Paradigm series, Minimed 530G, 6XX series, and 7XX series) were found to have the potential for abnormal insulin delivery due to changes in air pressure, which can be found during airplane…
FDA · DeviceMedtronic MiniMed, Inc.Worldwide - US Nationwide distribution including in the states of AK, AL, AR,…Official notice →- 2024-10-09
- US
Medtronic MiniMed, Inc. recalls MiniMed 620G Insulin Pump, REF: MMT-1510, MMT-1710, MMT-1750; MiniMed 630G Insulin Pump, REF: MMT-1515, MMT-1714, MMT-1715, MMT-1754,…
Insulin pumps that have been dropped, bumped, or experienced physical impact may have damage to internal electrical components, which may cause reduced pump battery life. Since the defect reduces the battery life…
FDA · DeviceMedtronic MiniMed, Inc.US: CT, MI, PA, WA, IA, NY, ND, AZ, TX, OH, NC, AL, MN, IN, NJ, KY, UT, CA,…Official notice → - 2024-02-14
- US
Medtronic MiniMed, Inc. recalls Guardian 4 Glucose Sensor, REF: MMT-7040A, MMT-7040C1, MMT-7040C2, MMT-7040C3, MMT-7040D1, MMT-7040D2, MMT-7040MA, MMT-7040QC1,…
Some sensors may have a glucose oxidase (GOX) layer thickness outside of specification (5.5 to 9.2 ¿m). A non-conforming GOX layer thickness could impact sensor function (sensor glucose value) or loss of sensor…
FDA · DeviceMedtronic MiniMed, Inc.Worldwide - US Nationwide distribution including in the states of PR, AK, AL,…Official notice → - 2023-01-11
- US
Medtronic MiniMed recalls Guardian iOS app (MMT-8200) and Guardian Android app (MMT-8201), part of the Guardian 4 system
An app, part of a continuous glucose monitoring system, for use with smartphone devices may automatically log out from CareLink, then the app is not able to upload data. When logged out, linked care partners will not…
FDA · DeviceMedtronic MiniMedOUS: Austria, Belgium, Chile, Colombia, Czech Republic, Denmark, Finland,…Official notice → - 2022-11-16
- US
Medtronic MiniMed recalls Insulin Pump/Model: MiniMed 620G/ MMT-1750 MiniMed 640G/ MMT-1711, MMT-1712, MMT-1751, MMT-1752
Medtronic identified a cybersecurity vulnerability in the MiniMed 600 series Insulin Pump Systems associated with the communication protocol that could allow unauthorized access to the pump system. This unauthorized…
FDA · DeviceMedtronic MiniMedUS: AK, AL, AR, AZ, CA, CO, CT, DC, DE, FL, GA, GU, HI, IA, ID, IL, IN, KS,…Official notice → - 2022-04-06
- US
Medtronic MiniMed recalls MiniMed 630G: MMT-1715, MMT-1754, MMT-1755; MiniMed 670G: MMT-1740, MMT-1741, MMT-1742, MMT-1760, MMT-1761, MMT-1762, MMT-1780, MMT-1781,…
New or replacement insulin pumps are not pre-programmed with basal rates or other verified settings (bolus wizard settings, sensor settings, etc.), which must be set up and saved on pumps prior to use. Patients who do…
FDA · DeviceMedtronic MiniMedUS: OH, UT, IL, NY, FL, LA, NE, NV, CA, VA, TX, DE, KS, MS, MI, AL, OK, AZ,…Official notice →
Other drugs & medical recalls in the United States
- 2022-07-20
- US
Cook Incorporated recalls Pressure Monitoring Set, Single-lumen uncoated central venous catheter. RPN C-PMS-250, GPN G02838
The products may contain excess coating material on the outside and/or interior of the needle component. Potential adverse events that may occur if an affected product is used include a delay in the procedure, a…
- US
- US
Isopure Corp recalls Isopure Sodium Bicarbonate Mixing and Distribution System (IsoMix PRO)
Isopure received a report of a hazardous incident involving a device which had experienced an electrical short that resulted in a thermal event, damaging some of the device components. The firm is alerting customers to…
FDA · DeviceIsopure CorpDomestic distribution to AL AZ CO DE FL GA IN KS KY LA MA MD ME MN MO NC NY OK…Official notice → - US
Spectranetics Corporation recalls Philips Laser System, REF LAS-100, Intermittent Operation, Duty cycle dependent upon device in use 100 - 240 VAC, 50/60HZ, 16 AM
The LAS-100 Laser system may detect an inoperable hardware component during power up, which results in an error code and the system not being operable until code is cleared.
FDA · DeviceSpectranetics CorporationUS: AR AZ CA CO CT FL GA HI IA IL IN KS LA MA MD ME MI MN MO NC NJ NY OK PA TN…Official notice → - US
Zeltiq Aesthetics, Inc recalls CoolMax ZELTIQ Vacuum Applicator REF BRZ-AP1-080-000
Executing a voluntary discontinuation and removal of parallel plate applicators due to an increase complaint rate for adverse event Paradoxical Hyperplasia (HP) during the 2019 to 2021 timeframe.
FDA · DeviceZeltiq Aesthetics, IncU.S. AK, AL, AR, AZ, CA, CO, CT, DC, DE, FL, GA, HI, IA, ID, IL, IN, KS, KY,…Official notice → - US
Philips Medical Systems DMC GmbH recalls DigitalDiagnost 4 High Performance. radiography and fluoroscopy system
Following a system restart where the Table Height 2 (TH2) is the default setting and then switched to Wallstand VS2, operators will see an incorrect orientation of image on the first examination due to an issue in the…