Laser engraving machine (LaserPecker) · LaserPecker L1
The product can be used without a protective casing/screen, and the protective cap on the laser head leaves a gap between the laser head cover and the workpiece when the laser head is at either its highest or lowest…
Read the official notice →
- Date
- 2022-11-18
- Country
- Germany
- Brand
- LaserPecker
- Product
- Laser engraving machine
- Classification
- damage to sight
- Category
- Tools & DIY
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check the brand, model, batch number and pictures against the official notice.
- If yours matches, stop using it and keep it away from children.
- Follow the remedy in the notice: a refund, repair or replacement from the seller or maker. Many recalls also apply to items bought online.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
Other tools & diy recalls in Germany
- 2022-12-23
DE
EULaser engraving machine (Atomstack) · Atomstack Lasergravierer A5 20 W
The product is not equipped with protective casing, while the protective cover always leaves an open gap between the laser head cover and the workpiece when used; in addition, the product may be operated without the…
- 2022-11-25
- DEEU
Laser engraving machine (Twotrees) · Totem 60P
The product does not have a protective housing that prevents access to laser radiation, no manual reset nor key-operated main switch, and lacks an emission warning device. In addition, the laser does not switch off in…
- DEEU
Particle filter mask (Oley) · OLEY FFP2 NR
The total filtration capacity of the mask is insufficient (measured value: as low as 60%). Consequently, the product does not fulfil the health and safety requirements; thus, even if combined with other recommended…
- 2022-10-28
- DEEU
Laser pointer · Laserpointer
The laser beam is too powerful. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the requirements of the General Product Safety Directive nor with European standard EN…
EU Safety Gate · reported by GermanyOfficial notice → - 2022-09-23
- DEEU
Laser marking machine
The screens of the machine do not reach the required protection level of 1. Due to the defective plate, reflected or diffused laser radiation can escape from the working area of the machine and cause damage to the…
EU Safety Gate · reported by GermanyOfficial notice → - 2022-09-16
- DEEU
Particle filter mask (MA Trading) · Disposable Protection Mask
The particle/filter retention of the material is insufficient (measured values: as low as 30%). Consequently, the product does not fulfil the health and safety requirements; thus, even if combined with other…