Laser engraving machine (Atomstack) · Atomstack Lasergravierer A5 20 W
The product is not equipped with protective casing, while the protective cover always leaves an open gap between the laser head cover and the workpiece when used; in addition, the product may be operated without the…
Read the official notice →
- Date
- 2022-12-23
- Country
- Germany
- Brand
- Atomstack
- Product
- Laser engraving machine
- Classification
- damage to sight
- Category
- Tools & DIY
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check the brand, model, batch number and pictures against the official notice.
- If yours matches, stop using it and keep it away from children.
- Follow the remedy in the notice: a refund, repair or replacement from the seller or maker. Many recalls also apply to items bought online.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More Atomstack recalls
- 2026-02-27
DE
EULaser engraver (Atomstack) · P1 5000mW Laser Cutter
The machine lacks a protective enclosure, and the laser head's cover leaves an open gap in the working space during operation. This can allow reflected laser radiation to escape and cause damage to the sight of the…
Other tools & diy recalls in Germany
- 2023-02-17
- DEEU
Particle filter mask (AKA Mask) · aka C2
The physical resistance of the filtering material is too low and the particle/filter retention of the material is insufficient. Consequently, the product does not fulfil the health and safety requirements; thus, even…
- DEEU
Particle filter mask (ROSIMASK) · Rosimask RM 2 FFP2 Atemschutzmaske
The particle/filter retention of the material is insufficient (measured values: as low as 28%). Consequently, the product does not fulfil the health and safety requirements; thus, even if combined with other…
- 2023-01-06
- DEEU
Laser engraving machine (Ortur)
The laser beam is too powerful and the product does not have a protective housing that prevents access to laser radiation. Direct viewing of a laser beam can cause eye damage. The product does not comply with the…
- 2022-11-25
- DEEU
Laser engraving machine (Twotrees) · Totem 60P
The product does not have a protective housing that prevents access to laser radiation, no manual reset nor key-operated main switch, and lacks an emission warning device. In addition, the laser does not switch off in…
- DEEU
Particle filter mask (Oley) · OLEY FFP2 NR
The total filtration capacity of the mask is insufficient (measured value: as low as 60%). Consequently, the product does not fulfil the health and safety requirements; thus, even if combined with other recommended…
- 2022-11-18
- DEEU
Laser engraving machine (LaserPecker) · LaserPecker L1
The product can be used without a protective casing/screen, and the protective cap on the laser head leaves a gap between the laser head cover and the workpiece when the laser head is at either its highest or lowest…