Altec Industries, Inc.: Incorrect Hydraulic Plumbing to Lift Cylinders
The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.
Read the official notice →- Date
- 2021-12-20
- Country
- United States
- Brand
- Altec Industries
- Product
- EQUIPMENT
- Units
- 150 affected
- Category
- Vehicles
- Source
- NHTSA
Copied automatically from the US National Highway Traffic Safety Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the US National Highway Traffic Safety Administration has the exact models, batch codes and remedy, and it takes priority.
More Altec Industries recalls
- 2022-03-11
USAltec Industries, Inc.: Missing Carbon Monoxide Detectors
Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.
- 2022-02-09
- US
Altec Industries, Inc.: Over-Tightened Bolts in Rotation Bearing
Broken bolts can cause separation of the pedestal and turntable, increasing the risk of injury.
- US
Altec Industries, Inc.: Shear Plates May Fail
Shear plate failure can result in the separation of the subbase and truck frame, increasing the risk of injury.
- 2022-02-03
- US
Altec Industries, Inc.: Boom May Move in an Unintended Direction
The boom moving in an unintended direction increases the risk of injury.
- US
Altec Industries, Inc.: Bolt Failure May Cause Pedestal Separation
Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.
- 2021-11-15
- US
Altec Industries, Inc.: Pedestal and Truck Frame May Separate
A broken side plate may result in pedestal and truck frame separation, increasing the risk of injury.
Other vehicles recalls in the United States
- 2021-12-21
- US
Tesla, Inc.: Front Trunk Hood May Open Unexpectedly/FMVSS 113
If the primary latch is inadvertently released and the secondary latch is not engaged, the hood could open unexpectedly, obstructing the driver's view and increasing the risk of a crash.
- US
Chrysler (FCA US, LLC): Rearview Image May Not Display/FMVSS 111
A rearview camera that does not display an image reduces the driver's rear view, increasing the risk of a crash.
- 2021-12-20
- US
Daimler Trucks North America, LLC: Bus May Move with Wheelchair Lift Deployed
Bus movement with the wheelchair lift deployed can increase the risk of injury.
- US
Jayco, Inc.: Melted Wiring Harness May Cause Vehicle Stall
A melted wiring harness can cause the vehicle to stall, increasing the risk of a crash.
- US
Battle Motors, Inc.: Fuel Tubes May Crack and Leak Fuel
A high-pressure fuel leak in the presence of an ignition source can increase the risk of a fire.
- US
Van Hool N.V.: Fuel Tubes May Crack and Leak Fuel
A high pressure fuel leak in the presence of an ignition source can increase the risk of a fire.