Toyota Motor Engineering & Manufacturing: Missing Welds May Cause Shock Absorber to Separate
A separated shock absorber can cause a loss of vehicle stability, increasing the risk of a crash.
Read the official notice →- Date
- 2022-04-13
- Country
- United States
- Brand
- Toyota
- Product
- STRUCTURE
- Units
- 4,215 affected
- Category
- Vehicles
- Source
- NHTSA
Copied automatically from the US National Highway Traffic Safety Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the US National Highway Traffic Safety Administration has the exact models, batch codes and remedy, and it takes priority.
More Toyota recalls
- 2022-05-06
DE
EUPassenger car (Toyota) · Camry
Due to the material used, the caps on the vane inside the vacuum pump may wear prematurely and could become stuck between the vane and the vacuum pump housing.Consequently, the caps may damage the vane and other…
- 2022-04-28
USToyota Motor Engineering & Manufacturing: Rearview Camera Image May Not Display/FMVSS 111
A rearview camera that does not display an image reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.
- 2022-04-13
- US
Toyota Motor Engineering & Manufacturing: Stability Control Deactivated on Startup/FMVSS 126
Driving with a deactivated stability control system increases the risk of a crash.
- 2022-03-25
PTEUPassenger car (Toyota) · C-HR, GR Yaris, Yaris.
The radar sensor may malfunction due to a faulty installation. This can result in a failure to detect a vehicle in front through the PCS (pre-collision system), which will not provide warnings or brake assistance and…
- 2022-03-18
- DEEU
Passenger car (Toyota) · Tundra
The cabling of the front turn signals has been incorrectly assembled. When the front warning lights are activated, this results in reduced brightness of the headlamps and this may increase the risk of an accident. The…
- 2022-02-25
BGEULight commercial vehicle (Toyota) · Proace
Due to an error in the specific software for calibration of the electronic engine control unit (ECU), an incorrect value is provided when the data is processed by the vehicle. The product does not comply with the…
Other vehicles recalls in the United States
- 2022-04-13
- US
FRONTRUNNER BUS GROUP, INC.: Programmable Relay Power Center Module Failure
Failure of the Programmable Relay Power Center (PRC) increases the risk of a fire.
- US
BMW of North America, LLC: Airbag Control Unit Software Malfunction
An air bag malfunction indicator light that fails to warn the driver of a problem increases the risk of injury in a crash.
- US
Toyota Motor Engineering & Manufacturing: Stability Control Deactivated on Startup/FMVSS 126
Driving with a deactivated stability control system increases the risk of a crash.
- US
Bendix Commercial Vehicle Systems, LLC: Brake Light Switch Malfunction
Brake lights that do not operate as intended can cause confusion to other drivers, increasing the risk of a crash.
- US
NTN Bearing Corporation of America: Driveshaft Failure Due to Improper Heat Treatment
Driveshaft failure can cause a sudden loss of drive power, increasing the risk of a crash.
- 2022-04-12
- US
Prevost Car (US) Inc.: Passenger Bench Seat Frame Bolts May Be Loose
Loose seat frame bolts may allow the seat to move, increasing the risk of injury during a crash.