Toyota Motor Engineering & Manufacturing: Inverter May Lose Connection and Cause a Loss of Drive Power
Incomplete contact can cause a loss of motive power, increasing the risk of a crash. In addition, a loose bolt can cause an electrical short while the vehicle is powered on, increasing the risk of a fire.
Read the official notice →- Date
- 2025-12-16
- Country
- United States
- Brand
- Toyota
- Product
- HYBRID PROPULSION SYSTEM
- Units
- 55,405 affected
- Category
- Vehicles
- Source
- NHTSA
Copied automatically from the US National Highway Traffic Safety Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the US National Highway Traffic Safety Administration has the exact models, batch codes and remedy, and it takes priority.
More Toyota recalls
- 2026-01-23
USToyota Motor Engineering & Manufacturing: Incorrect Side Marker Lights/FMVSS 108
Without the correct lights, it may be difficult for other road users to see the vehicle from the rear or side, increasing the risk of a crash.
- 2026-01-09
PT
EUPassenger van / Light commercial vehicle (Toyota) · Proace, Proace Verso, Proace City, Proace City Verso (ICE and BEV)
A software issue may cause both the multimedia screen and the instrument cluster to turn completely black when the vehicle is started. When this occurs, the displays do not recover. As a result, the driver cannot see…
- 2025-12-17
- US
Toyota Motor Engineering & Manufacturing: Incorrectly Installed Third Row Seat Belt Anchor
A seat belt that does not properly restrain an occupant increases the risk of injury during a crash.
- 2025-11-21
- PTEU
Passenger van / Light commercial vehicle (Toyota) · Proace, Proace Verso
A software calibration error in the Engine Electronic Control Unit (ECU) causes incorrect IUPR (In-Use Performance Ratio) values, which may delay the malfunction indicator (MIL) warning. As a result, the vehicle could…
- 2025-11-07
- PTEU
Passenger van / Light commercial vehicle (Toyota) · Proace City
The indirect tyre pressure monitoring system (iTPMS) may fail to activate the low tyre pressure warning at the required minimum threshold due to incorrect calibration in the Electronic Stability Control (ESC) software.…
- 2025-11-06
- US
Toyota Motor Engineering & Manufacturing: Debris in Engine May Cause Stall
A loss of drive power increases the risk of a crash.
Other vehicles recalls in the United States
- 2025-12-17
- US
BMW of North America, LLC: Air Bag Inflators May Rupture
An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the…
- US
Bell Sports, Inc.: Helmets May Not Adequately Protect User/FMVSS 218
A helmet that does not provide adequate protection increases the risk of injury during a crash.
- 2025-12-16
- US
Gillig, LLC: Wheelchair Restraint Retractor May Not Lock
An unsecured wheelchair can move during transit, increasing the risk of injury.
- 2025-12-15
- US
Gillig, LLC: Emergency Exit Window Latch May Fail/FMVSS 217
A window that opens during a crash may not properly retain passengers, increasing the risk of injury.
- US
Mack Trucks, Inc.: Rear Brakes May Overheat
Overheated brakes may cause a tire blowout or fire, increasing the risk of a crash.
- 2025-12-12
- US
Ford Motor Company: Right Rear Axle Shaft May Fail
A broken rear axle shaft can result in a loss of drive power or vehicle rollaway when the vehicle is placed in park. Either of these scenarios can increase the risk of a crash.