Passenger car (Polestar) · Polestar 2
A front suspension bearing can detach which can affect the manoeuvrability of the vehicle, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of…
Read the official notice →- Date
- 2023-09-08
- Country
- Germany
- Brand
- Polestar
- Product
- Passenger car
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More Polestar recalls
- 2025-09-12
PT
EU
Passenger car (Polestar) · Polestar 3
The hood wing may have been incorrectly attached to the front bumper during manufacturing. In such cases, the hood wing could come loose and detach while driving, which can lead to injuries. The product does not comply…
- 2025-07-25
BE
EU
Passenger car (Polestar) · Polestar 3
Due to moisture ingress in a connector housing, the internal pins can corrode. This can result in electrical malfunctions, such as parking brake engagement issues, start-up difficulties, loss of power steering assist…
- 2025-07-11
PT
EU
Passenger car (Polestar) · Polestar 2
The vehicle's braking functionality can be disabled while using 'B' mode (in plug-in hybrid cars) or One Pedal Drive (in pure electric cars), after coasting downhill. This can lead to a collision and increase the risk…
- 2024-10-04
PT
EU
Passenger car (Polestar) · Polestar 2
One of the bolts holding the front left seat can be improperly fitted. This can increase the risk of injuries, in the event of a crash. The product does not comply with the Regulation on the approval and market…
- 2022-12-23
BE
EU
Passenger car (Polestar) · Polestar 1
High voltage battery cells can overheat when the battery is fully charged. This can lead to a thermal event inside the battery, increasing the risk of fire. The product does not comply with the Regulation on the…
Other vehicles recalls in Germany
- 2023-09-15
DE
EU
Passenger car (Bmw) · X5, X5M, X6, X6M, X7, XM
The gas generator in knee airbag modules was not properly inserted into the air cushion, resulting in the cushion failing to unfold sufficiently. As a result, it may not be able to deploy correctly in the event of an…
DE
EU
Passenger car (Mercedes-Benz) · S-Class
The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose…
- 2023-09-08
DE
EU
Passenger car (Bmw) · i7, 7er Limousine
The welding of the front seat structure is defective. In case of an accident, the joint in question can fail and compromise the restraint system, increasing the risk of injuries. The product does not comply with the…
- 2023-08-25
DE
EU
Passenger car (Hyundai) · Kona
The seat belt buckles in the back seat are faulty and do not lock, providing inadequate protection, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval…
DE
EU
Passenger car (Kia) · Cerato, Forte, Optima, Sorento, Sportage
Due to a manufacturing error, the engine might overheat due to fuel or oil leaks and subsequently break down. This may endanger the following traffic and can cause a fire. The product does not comply with the…
DE
EU
Passenger car (Cupra) · Formentor
The two rear left wheel bearing housings may prematurely fail and break, which could impair the vehicle’s stability and increase the risk of an accident. The product does not comply with the Regulation on the approval…