Passenger car (Mercedes-Benz) · CLS
The software of the airbag control module may be faulty. In the event of an accident, this can lead the active bonnet system not to be activated properly. This increases the risk of injury to other road users. The…
Read the official notice →- Date
- 2024-08-02
- Country
- Germany
- Brand
- Mercedes-Benz
- Product
- Passenger car
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More Mercedes-Benz recalls
- 2024-08-30
DE
EU
Passenger van / Light commercial vehicle (Mercedes-Benz) · Sprinter
The spring clamps on the rear axle may not have been hardened, leading to an insufficient pre-tension. This could increase the inclination of the rear axle and impair the vehicle’s track guidance, increasing the risk…
- 2024-08-09
US
Mercedes-Benz USA, LLC: Incorrectly Routed Brake Hose May Leak
A brake fluid leak can cause a loss of brakes and increase the risk of a crash.
DE
EU
Lorry (Mercedes-Benz) · eActros 983, eEconic 956
The electrical voltage stability of the high-voltage battery pack (CB400) may not be sufficiently stable due to the presence of a metal foreign body. Repeated surge events during charging could potentially damage…
- 2024-08-02
DE
EU
Passenger car (Mercedes-Benz) · E-Class, E-Class Coupe/Convertible, CLS, AMG GT 4-doors Coupe
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…
- 2024-07-26
DE
EU
Lorry (Mercedes-Benz) · eActros 983
Some vehicles may not lower automatically in tipping/rolling operations. If the driver does not notice the failed lowering, the roll-off tippers’ stability during operation may not be guaranteed. This may increase the…
- 2024-07-12
DE
EU
Passenger car (Mercedes-Benz) · C-class
The incorrect connection of a wiring harness to the pre-fuse box can cause a failure and increased electrical resistance. This can lead to a sudden loss of propulsion, which increases the risk of accidents and…
Other vehicles recalls in Germany
- 2024-08-06
DE
EU
Passenger car (Skoda) · Citigo, Roomster, Praktik, Fabia II, Fabia III,Rapid, Octavia III, Superb III, Karoq,…
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
- 2024-08-02
DE
EU
Vehicle part / Wheel rim (Autec) · VD (Vidra)
The bolt hole can be faulty due to a manufacturing error, which can lead the bolt to become loose. This increases the forces on the other bolts, resulting in settling or cracking. This can provoke the affected wheel…
DE
EU
Passenger car (Bmw) · 3 series, 4 series, 5 series, 6 series, X3, X4, X5, X5M, M4, M5
A seam on the inflator housing of the driver airbag may not have been correctly welded. In case of accident, when the airbag is deployed, the inflator can burst, releasing metal parts which could cause injuries. The…
DE
EU
Passenger car (Mercedes-Benz) · E-Class, E-Class Coupe/Convertible, CLS, AMG GT 4-doors Coupe
The electrical connector of the transmission wiring harness may not have been correctly processed. This can lead to water entering the connector, which could cause short circuit and can create a thermal overload of the…
DE
EU
Passenger car (Mini) · Countryman
The seat recliner adjuster may not be correctly welded, which could cause the backrest not to lock. If it doesn't lock, the seatback might not stay secure in a collision, increasing the risk of injury. The product does…
DE
EU
Passenger car (Bmw) · 2 series, iX1, X1, iX2, X2
The seat recliner adjuster may not be correctly welded, which could cause the backrest not to lock. If it doesn't lock, the seatback might not stay secure in a collision, increasing the risk of injury. The product does…