Passenger car (Ford) · Galaxy, Kuga, S-Max
The cooling airflow is insufficient, causing the oil channel to be blocked. This leads the connecting rod bearing to seize and the connecting rod to tear off. This can deteriorate the combustion engine, resulting in a…
Read the official notice →- Date
- 2024-03-29
- Country
- Germany
- Brand
- Ford
- Product
- Passenger car
- Classification
- fire
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More Ford recalls
- 2024-04-12
US
Ford Motor Company: Accessory Hood Scoop May Detach
A hood scoop that detaches while driving can damage the windshield or become a road hazard, increasing the risk of a crash.
- 2024-04-05
DE
EU
Pickup truck (Ford) · Ranger
The power child-lock can disengage allowing the rear occupant to open the door from inside although the child lock has beenactuated. This creates a risk of injuries for the occupant. The product does not comply with…
- 2024-03-29
DE
EU
Passenger car (Ford) · Explorer
The A-pillar trim may not be fastened correctly. it may come loose and fall onto the road, posing a risk to the following traffic. The product does not comply with the Regulation on the approval and market surveillance…
- 2024-03-22
US
Ford Motor Company: Tire Damage from Contact with Wheel Arch Liner
Damaged tires may experience a sudden loss of air pressure or tread separation, causing a loss of vehicle control and increasing the risk of a crash.
US
Ford Motor Company: Tires Manufactured Incorrectly
A loss of vehicle handling and control increases the risk of a crash.
US
Ford Motor Company: Fuel Supply Line May Leak
A fuel leak in the presence of an ignition source such as hot engine or exhaust components, can increase the risk of a fire. In addition, a loss of fuel may result in an engine stall, increasing the risk of a crash.
Other vehicles recalls in Germany
- 2024-03-29
DE
EU
Passenger car (Bmw) · X5, X5M, X6, X7
The dashboard in the affected vehicles may not have been manufactured to the manufacturer specifications. In the event of anaccident, the passenger side airbag may not deploy as intended which could increase the risk…
DE
EU
Passenger car (Ford) · Explorer
The A-pillar trim may not be fastened correctly. it may come loose and fall onto the road, posing a risk to the following traffic. The product does not comply with the Regulation on the approval and market surveillance…
DE
EU
Passenger car (VW) · Golf, Golf Sportsvan, Golf Variant, Phaeton
Cars initially used for internal purposes of Volkswagen AG might not have been correctly modified before they were sold to the general public. There is a possibility that certain safety systems of these cars are not…
- 2024-03-22
DE
EU
Passenger car (Mercedes-Benz) · C-Class
The bolts on the terminal clamps of the starter battery may come loose. This could increase the electrical contact resistance, leading to a local temperature increase at the terminal clamp connection point. This…
DE
EU
Passenger car (Mercedes-Benz) · EQE 350, EQE 350+, Mercedes-AMG EQE 43 4MATIC
The airbag control unit may not be encoded correctly. In the event of a rear-end crash the pyro-fuse activator may not properly isolate the high-voltage battery, increasing the risk of fire. The product does not comply…
DE
EU
Passenger car (Bmw) · i4, i5
Due to incorrectly produced high-voltage cell modules, the cell terminal and the cell-contact system in the battery are not in contact anymore. When strong electricity is flowing, that may cause the cell to overheat…