Passenger car (Bmw) · X3, X3M
Due to faulty rear-most screws, the screw fixings of the boot's lashing rails can fail in the event of a rear-end collision with heavy intrusion and penetrate the backs of the rear seats. This increases the risk of…
Read the official notice →
- Date
- 2024-11-08
- Country
- Germany
- Brand
- BMW
- Product
- Passenger car
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More BMW recalls
- 2024-11-19
USBMW of North America, LLC: Air Bags May Not Deploy as Intended
Air bags that do not deploy as intended during a crash increases the risk of injury.
- 2024-11-15
- US
BMW of North America, LLC: Oil Filter May Unscrew Due to Engine Vibration
A loose or detached oil filter can allow oil to escape from the engine and contact the rear tire or road surface, increasing the risk of a crash.
- 2024-11-12
- US
BMW of North America, LLC: Incorrectly Assembled Right-Side Curtain Air Bag
An incorrectly assembled air bag can result in delayed activation or improper deployment of the head curtain air bag, increasing the risk of injury in a crash.
- 2024-11-04
- US
BMW of North America, LLC: Insufficient Strength in B-Pillar Structure
A B-Pillar structure with reduced strength may not adequately protect passengers in a crash, increasing the risk of injury.
- 2024-10-18
DE
EUPassenger car (Bmw) · 1, 2, 2 Active Tourer/Gran Tourer, 3, 4, 5, 6, X1, X2, X3, X4, X5, X6
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on…
- 2024-10-17
- US
BMW of North America, LLC: Front Passenger Air Bag Fabric May Be Damaged
A damaged air bag may not inflate properly, increasing the risk of injury in a crash.
Other vehicles recalls in Germany
- 2024-11-15
- DEEU
Passenger car (McLaren) · GT
Excessive cable tension can result in unexpected latch opening. This can lead the bonnet to open while the car is in motion and obstruct the driver’s view. This increases the risk of accidents. The product does not…
- DEEU
Passenger car (Hyundai) · Grand Santa Fe, ix35, Veloster
Vehicles may develop an electrical short in the Anti-Lock Brake System (ABS) module, increasing the risk of an engine compartment fire. The product does not comply with the Regulation on the approval and market…
- DEEU
Motorcycle (HARLEY-DAVIDSON) · CVO Street Glide, CVO Road Glide, CVO Road Glide ST, Street Glide, Road Glide
The regulator output wire may rub against the crankcase's front corner, leading to insulation wear and potential exposure of the conductor. If this occurs, the 60-amp main fuse can blow, resulting in a sudden loss of…
- 2024-11-01
- DEEU
Passenger van / Light commercial vehicle (Opel) · Vivaro
Incorrectly fitted rear axle suspension springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and…
- DEEU
Passenger van / Light commercial vehicle (Fiat) · Scudo
Incorrectly fitted rear springs can lead to a loss of vehicle handling and the spring may come free from its support. The spring can fall onto the road whilst driving, posing a risk of accident and injuries to the…
- 2024-10-25
- DEEU
Passenger car (Aston Martin) · DBX707, DB12, Vantage
Variable pressure control during the extrusion process can cause irregularities, cracks or kinks in the internal wall of oil cooler hoses. This can create weak points that can rupture due to temperature and pressure…