Motorcycle (Kawasaki) · KLX230A
The front brake disc might have been fitted incorrectly during the manufacturing process. This can lead to deterioration of braking performance, increasing the risk of an accident. The product does not comply with the…
Read the official notice →- Date
- 2022-08-26
- Country
- Germany
- Brand
- Kawasaki
- Product
- Motorcycle
- Classification
- injuries
- Category
- Vehicles
- Source
- EU Safety Gate
Copied automatically from the European Commission's Safety Gate. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the European Commission's Safety Gate has the exact models, batch codes and remedy, and it takes priority.
More Kawasaki recalls
- 2025-06-13
DE
EUMotorcycle (Kawasaki) · Ninja 500
The clutch release lever may not be properly welded to the shaft due to a manufacturing error. This can cause the weld to break, making it impossible to disengage the clutch, which can increase the risk of accidents…
- 2023-03-24
- DEEU
Motorcycle (Kawasaki) · Ninja H2R, Ninja H2, Ninja H2 SX, Z H2,
The chain tensioner may malfunction due to wear of internal parts. This may cause the engine to stall while the vehicle is in motion, creating a risk of an accident. The product does not comply with the Regulation on…
- 2022-10-21
PLEUSelf-balancing scooter (hoverboard) (Kawasaki)
The product is not correctly insulated against water ingress. Water may enter the product which can damage the electric components causing it to overheat and catch fire. It may also cause a short circuit and make…
- 2022-03-04
- PLEU
Personal Watercraft (Kawasaki) · Jet Ski
The front storage compartment lid and fixings may be damaged under certain riding conditions such as riding in rough water. In these conditions water can be forced under the lid placing excessive pressure on the lid…
- 2021-12-24
- DEEU
Motorcycle (Kawasaki) · W800
During the process of assembling , it is possible that the manifold attachment parts were not tightened with the required torque. As a consequence, fixing elements on the exhaust manifold may become detached and fall…
- 2021-10-22
HUEUElectric scooter (Kawasaki) · FOLDING SCOOTER
The front wheel axle screw is not secured against loosening. As a result, the user might lose control and fall off the scooter, suffering injuries. In addition, the diameter of the holes on the handlebar (6.85 mm) is…
Other vehicles recalls in Germany
- 2022-09-02
- DEEU
Passenger car (Audi) · A3, RS 3
Deviations in the manufacturing process may result in either of the front seat belt reels not achieving full restraint, increasing the risk of injury in the event of an accident. The product does not comply with the…
- DEEU
Passenger car (Mercedes-Benz) · E-Class, E-Class Coupé/Cabriolet, CLS, AMG GT 4-door coupe
The seal for the special plug-in contact of the gearbox designed to protect against contact with moisture and splashing water is improperly installed. Thus splashed water can enter the socket contact when driving in…
- 2022-08-26
- DEEU
Passenger car (Opel) · Astra
Defective door pull sliders have been installed on all four side doors, which may lead to that the side doors do not close properly. Door(s) may be open while the vehicle is in motion, increasing the risk of an…
- DEEU
Passenger car (Peugeot) · Expert, Traveller
Steering box screws of the vehicle may have been improperly tightened, which can lead to a loss of steering control, increasing the risk of an accident. The product does not comply with the Regulation on the approval…
- 2022-08-19
- DEEU
Motorcycle (Honda) · GL 1800 Gold Wing
Incorrect functioning of the ignition timing control in the engine control unit can cause the engine to stop while driving, increasing the risk of an accident. The product does not comply with the Regulation on the…
- DEEU
Passenger car (Mercedes-Benz) · EQC
The high-voltage battery may not meet specifications. If a cell module is not screwed tight enough, the connection could be loosened by vibrations while in motion. The electrical resistance of the connection could…