Great Dane Trailers: iABS Securing Screws Improperly Tightened
Pressure loss in the iABS unit can cause a loss of brake function, increasing the risk of a crash.
Read the official notice →- Date
- 2021-10-27
- Country
- United States
- Brand
- Great Dane Trailers
- Units
- 1,843 affected
- Category
- Vehicles
- Source
- NHTSA
Copied automatically from the US National Highway Traffic Safety Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check whether your vehicle is affected by entering its VIN (vehicle identification number) on the manufacturer's or the agency's recall lookup.
- Contact a dealer to book the repair. Recall repairs are normally free of charge.
- If the notice says not to drive or to park outside, follow that until the repair is done.
General guidance from Recall Atlas. The official notice from the US National Highway Traffic Safety Administration has the exact models, batch codes and remedy, and it takes priority.
More Great Dane Trailers recalls
- 2023-03-31
USGreat Dane Trailers: Insufficient Lubricant in Wheel Hub
Hub bearing failure could cause the wheel hub assembly to detach, causing a loss of stability and control, or create a road hazard, and increase the risk of a crash.
- 2022-09-30
- US
Great Dane Trailers: Loose Brake Pad Retaining Clip May Damage Tire
A retaining clip or bracket that detaches can damage the brake pad, reducing brake performance, damage a tire valve, causing a flat tire, or become a road hazard, increasing the risk of a crash.
- 2022-06-23
- US
Great Dane Trailers: Incorrect Axle Spindle Nuts Installed
Bearing failure could lead to wheel detachment, or a loss of control of the trailer, increasing the risk of a crash.
- 2022-05-12
- US
Great Dane Trailers: Missing Rear Impact Plate/FMVSS 223 & 224
Rear impact guards with missing plates may not be identified in the event of a safety recall, potentially resulting in an un-remedied safety issue and an increased risk of a crash or injury.
- 2022-03-15
- US
Great Dane Trailers: Radius Rod Mounting Bolts Not Properly Tightened
Loose or missing bolts can cause the suspension to shift rearward, resulting in a loss of vehicle control. In addition, bolts that fall off can become a road hazard. Both of these scenarios can increase the risk of a…
- 2021-12-07
- US
Great Dane Trailers: Insufficient Lubricant in Wheel Hub
Hub bearing failure could cause the wheel hub assembly to detach, causing a loss of stability and control, creating a road hazard, and increasing the risk of a crash.
Other vehicles recalls in the United States
- 2021-10-28
- US
Chrysler (FCA US, LLC): Rear Spoiler May Detach While Driving
A damaged rear spoiler could detach and become a road hazard, increasing the risk of a crash.
- US
American Chrome Company: Hubcap Can Separate and Become Road Hazard
A separated hubcap can create a road hazard, increasing the risk of a crash.
- 2021-10-27
- US
Palfinger USA, LLC: Crane Shear Plates May Develop Fatigue Cracks
The cracks may cause the shear plate to fail, allowing the boom tip and any attached load to fall, increasing the risk of injury.
- US
Hyundai Motor America: Brake Fluid Contamination
Reduced braking performance can extend the distance required to stop the vehicle, increasing the risk of a crash.
- 2021-10-26
- US
Nissan North America, Inc.: Engine Harness Damage May Cause Stall
A blown fuse may cause an engine stall, increasing the risk of a crash.
- US
WABCO USA LLC: iABS Securing Screws Improperly Tightened
Pressure loss in the iABS unit can cause a loss of brake function, increasing the risk of a crash.