Baxter Healthcare Corporation recalls HDS Traction Boot II, REF AR-6529-23, The Traction Boot is designed to position, support and/or distract the patient's foot for…
Baxter Healthcare Corporation is issuing an Urgent Medical Device Recall for the Hip Distraction System, Traction Boot II, due to the boots being assembled incorrectly. The locking ridge on the front face of the boot…
Read the official notice →- Date
- 2024-03-27
- Country
- United States
- Brand
- Baxter Healthcare
- Product
- HDS Traction Boot II, REF AR-6529-23, The Traction Boot is designed to position, support and/or distract the patient's foot for hip surgery
- Classification
- Class II
- Units
- US Nationwide distribution in the state of Florida.
- Category
- Drugs & medical
- Source
- FDA · Device
Copied automatically from the US Food and Drug Administration. Details may be shortened or out of date; the official notice is the authoritative source. Disclaimer
What to do
- Check the product name, strength and lot number against the official notice.
- Do not stop a prescribed medicine without talking to your doctor or pharmacist first.
- Ask the pharmacy or supplier about a replacement or refund.
General guidance from Recall Atlas. The official notice from the US Food and Drug Administration has the exact models, batch codes and remedy, and it takes priority.
More Baxter Healthcare recalls
- 2024-04-17
USBaxter Healthcare Corporation recalls Hillrom Welch Allyn Connex ProBP 3400 Digital Blood Pressure Device, marketed under the following models: a) PROBP 3400, SUREBP,…
Baxter received reports of an issue related to the construction of the power cord not meeting the insulation rating per country-specific requirements and international electrical standards.
- 2024-04-10
- US
Baxter Healthcare Corporation recalls Hill-Rom PRO+ 36" MRS Surface, REF P7924A03, The pro+ mattress is intended for patient support and for the prevention and/or…
Inconsistencies were identified with service records associated with corrections performed for a previous Medical Device Correction issued by Baxter (ref number: FA-2022-026). Your devices have been identified as…
FDA · DeviceBaxter Healthcare CorporationUS Nationwide distribution in the state of Colorado.Official notice → - 2024-04-03
- US
Baxter Healthcare Corporation recalls Baxter Supple Peri-Guard Repair Patch (legacy product codes): a) PC0404SNBIO, b) PC0608NSBIO, c) PC0814SNBIO, d) PC1016SNBIO
A new contraindication was added to the IFU which states that Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal…
FDA · DeviceBaxter Healthcare CorporationUS Distribution to states of: CT, VA, TX, PA and IL; and OUS (foreign)…Official notice → - 2024-03-20
- US
Baxter Healthcare Corporation recalls CLEARLINK Non-DEHP Solution Set Luer Lock Adapter, Product Code 2R8401
Baxter Healthcare Corporation is issuing an Urgent Medical Device Recall for the Clearlink Non-DEHP solution set listed below due to potential leaks originating from the drip chamber.
- US
Baxter Healthcare Corporation recalls STERIS Boot Assembly, Traction Device, OT 1000, Part Number REF 10009192
Three lots of the Boot Assembly, Traction Device are being recalled due to due to a customer report of an incorrectly oriented locking pin which caused the boot to detach from the traction system. If an impacted device…
FDA · DeviceBaxter Healthcare CorporationUS Nationwide distribution in the state of Alabama.Official notice → - 2024-02-28
- US
Baxter Healthcare Corporation recalls Baxter Exactamix Pro 1200, REF EXM12DY
An error was identified in software versions 2.0.8 and 2.1.8 while using the "Use Some Overfill" feature which may lead to over-delivery of an ingredient. This issue can result in redundant ingredient delivery of the…
FDA · DeviceBaxter Healthcare CorporationUS: AL, AZ, CA, FL, GA, IA, KY, MD, MI, MN, MO, NC, NE, NH, NJ, NV, NY, OR,…Official notice →
Other drugs & medical recalls in the United States
- 2024-03-27
- US
Angiodynamics, Inc. recalls MINI STICK MAX 5F X 10 CM STD .018 NI/TU ECHO 1.6" PG- Used for the percutaneous introduction of a guidewire into the vascular system.…
Non-conformance may prevent the guidewire from passing through the introducer hub during a surgical procedure. The inability of the guidewire to pass through the introducer is due to the presence of voids in the…
FDA · DeviceAngiodynamics, Inc.Worldwide distribution - US Nationwide and the countries of AT, CA, CH, CZ,…Official notice → - US
D.O.R.C. Dutch Opthalmic Research Center Intl B.V. recalls Directional Laser Probe with Alcon / Lumenis connector (27 gauge / 0.4 mm)
When using those products you may experience difficulties to extend or retract the laser fiber, and in some occasions may also have difficulties to direct the laser fiber tip precisely.
FDA · DeviceD.O.R.C. Dutch Opthalmic Research Center Intl B.V.US Nationwide distribution in the states of AZ, CO, FL, IN, MD, NC, NY, OH,…Official notice → - US
Covidien recalls Situate Laparotomy Sponge, RF and X-ray Detectable, REF: L1818-04P01C-1
Packs including 5 laparotomy sponges may contain incorrect product with a blue loop, X-ray detectable feature, and ethylene oxide treatment; however, this incorrect product wasn't steam pre-treated prior to…
FDA · DeviceCovidienUS Nationwide distribution including in the states of AK, AL, AZ, CA, CO, FL,…Official notice → - US
Randox Laboratories Ltd. recalls Liquid Protein Calibrators. C3 and Haptoglobin liquid protein calibrators used with Randox IgA, IgG, and IgM assays that require sample…
The firm has realigned C3 and Haptoglobin in Liquid Protein Calibrators, IT2691, to reference material ERM-DA470k/IFCC.
- US
Thommen Medical AG recalls impression coping, repositionable, short, screw-retained, PF 4.0
The depth of the internal canal was not manufactured according to specifications. Thus, the impression coping cannot be firmly connected to the implant.
FDA · DeviceThommen Medical AGUS Nationwide distribution in the states of OH and KY.Official notice → - US
Preat Corp recalls Preat Nobel Active/Conical-compatible RP Titanium Blank, REF 9000967
Due to a manufacturing issue, the screw seat location on the abutment product may be too high, causing mating screw to have a shorter engagement length into the associated implant.